How to Bypass the Switch on a Recliner Chair

Recliner chairs can be a staple in many homes, giving you comfort and a feeling of relaxation. But what happens when the switch malfunctions or stops working? If you are wondering how to bypass the switch on a recliner chair, this guide will walk you through the process safely and effectively.

Understanding Your Recliner Chair

Be aware of what constitutes your recliner chair before you start bypassing. Most recliners employ a power switch or a manual lever for activation. The electric motor is the one controlling the movement of position through the seating. If the switch fails to work or is somehow unresponsive, you might have to bypass to keep using your recliner .

Safety Precautions

Before you attempt to bypass this switch, ensure to always take precautions;

1. Chair Disconnection: Ensure the chair is always unplugged for the safety of no electric shock.
2. tsafe Handling of Tools: Always arrange your tools and only use them for what they are meant to do.
3. Work in a Clear Space: Ensure your workspace is free from clutter and other distractions.

Tools Needed

• Screwdriver Either flathead or Phillips, depending on what type you may have.
• Wire strippers, if you would need to run one across.
• Electrical tape
• Multimeter (optional, for testing)

Step by Step Guide on how to bypass the switch on a recliner chair

Step 1: Access the Switch

1. Remove Cushion: If your recliner has cushions that can be pulled off, then remove them and find the switch mechanism.
2. Locate the Switch: The switch is usually located along the side or back of the chair.

Step 2: Inspect the Cables

1. Inspect the Connections: Locate all cable connections to the switch. Look for loose, frayed, or damaged cables that need repair or replacement.
2. Test the Switch: Use a multimeter to determine if the switch has continuity or not. This will indicate if it is bad or not.

Step 3: Bypass the Switch

1. Identify Wires: Locate the two wires leading to the switch. Chances are, these are color coded as red and black wires
2. Sever Wires: If you suspect that the switch is faulty, pull it off from the circuit by cutting the two incoming wires to it. Leave them long enough so you could work with them.
3. Strip the Ends: Use the wire strippers to take off an inch of an inch of insulation both ends of the two wires.

Step 4: Wire Connection

1. Twist the Wires Together: Use the bare ends both wires and twist them together. This will enable the current to bypass the switch.
2. Tape with Electrical Tape: Then secure them with electrical tape to avoid accidental contact.

Step 5: Test the Chair

1. Plug It Back In: Now, insert the recliner chair back into the power outlet.
2. Test the Mechanism: Once done, you can test the mechanism by pressing the recline button or using the manual lever to check if the chair responds.

Final Thoughts

Ignoring the switch on a recliner chair could be a pretty simple process when done with care. But still, this is not a permanent solution; instead, it is a mere temporary remedy. Replacing the switch or getting expert help to make it right is always recommended.

Important Note

Always put safety first, however inconvenient the situation might be. Don't hesitate to seek professional help if you feel uncomfortable with the process, even with some of the electrical components.

Follow the steps below to have a recliner chair up and operational again and enjoy comfort. Remember that routine servicing of your recliner ensures extended use life and also eliminates future possible problems.